How to Reset Arlo Doorbell

Resetting your Arlo Doorbell can be helpful in resolving common issues or preparing the device for a new setup. Whether you’re troubleshooting connectivity problems or clearing your settings, the reset process is straightforward and effective. This guide will walk you through the necessary steps of How to Reset Arlo Doorbell safely and efficiently.

Why You Might Need to Reset Your Arlo Doorbell

There are several situations where resetting your Arlo Doorbell may become necessary. If you experience persistent connectivity issues, such as the doorbell failing to connect to your Wi-Fi network or app, a reset can help reestablish the connection. Additionally, if the device is not functioning as expected, such as missed notifications or a non-responsive button, resetting can often resolve these problems. Another common reason is to prepare the doorbell for a new user or location, which requires clearing all existing settings and data. Resetting also ensures that any configuration errors or app integration issues are resolved, allowing you to set up the device anew without lingering complications.

Tools You’ll Need

Before proceeding with the reset process, ensure you have the following tools and items on hand to make the procedure smooth and hassle-free:

• Wi-Fi Credentials: You will need the Wi-Fi network name and password to reconnect the device after the reset.
• Small Pin or Paperclip: Some doorbells have a dedicated reset button that requires a small pin or paperclip to press.
• Smartphone or Tablet: A device with the compatible app installed is essential for reconfiguration after the reset.
• Power Source: Make sure the doorbell is either fully charged or connected to a power source during the process.

Having these tools ready will help you complete the reset and setup efficiently.

Safety and Preparation

Before performing a reset on your doorbell, it’s important to ensure a safe and smooth process by following these preparation steps:

1. Ensure Power Stability: Check that the doorbell is either fully charged or securely connected to its power source. Interrupting power during a reset could cause issues with the device.
2. Handle Tools Carefully: If using a pin, paperclip, or any sharp object to press the reset button, exercise caution to avoid injury or accidental damage to the device.
3. Locate Important Information: Have your Wi-Fi network name and password readily available to avoid delays during reconfiguration. This information will be required to reconnect the device post-reset.
4. Check the Installation Area: Inspect the doorbell’s mounting location to ensure it’s secure and free of any water or debris that might interfere with proper functioning after the reset.

By taking these precautions, you can minimize potential issues and ensure the process is completed safely and effectively.

10 Methods How to Reset Arlo Doorbell

1. Soft Reset via Arlo App

The easiest and least intrusive method to reset your Arlo Doorbell is through the Arlo app. Open the app on your smartphone and navigate to the device settings for your doorbell. Within the settings menu, you will find the option to restart or reboot the device. This soft reset does not erase any of your configurations or saved data but can help fix minor connectivity or operational issues. Performing a soft reset is often the first step recommended before trying more drastic methods.

2. Power Cycle Reset

A power cycle is one of the simplest forms of resetting electronic devices. For battery-powered Arlo Doorbells, remove the battery or disconnect the device from its power source. Wait for about 30 seconds to one minute, then reconnect the battery or power supply. This interruption allows the doorbell’s internal system to reboot and clear minor glitches. Power cycling is effective for solving temporary freezes, motion detection delays, or network drops.

3. Factory Reset Using the Reset Button

Most Arlo Doorbells have a dedicated reset button located on the device. To perform a factory reset, press and hold the reset button for approximately 10–15 seconds until the LED indicator flashes, signaling that the reset process has started. A factory reset returns the doorbell to its original default settings, removing all Wi-Fi credentials, linked accounts, and custom configurations. This method is ideal when selling, transferring, or troubleshooting persistent issues.

4. Reset Through the Base Station or Smart Hub

If your Arlo Doorbell is connected to an Arlo Smart Hub or base station, you can initiate a reset through the hub interface. Access the hub via the Arlo app or web portal and select the option to remove or reset the connected doorbell. This method is particularly useful when the doorbell is not responding to direct physical reset attempts. Resetting through the base station ensures that the hub no longer retains previous configurations, providing a clean start for reconnection.

5. Wi-Fi Network Reset

Sometimes, connectivity issues arise due to Wi-Fi misconfigurations rather than the device itself. To perform a Wi-Fi reset, go to the Arlo app, navigate to your doorbell settings, and select the option to reset or update Wi-Fi credentials. The doorbell will temporarily disconnect from the network and allow you to re-enter the correct network name (SSID) and password. This method is effective for resolving intermittent connections or when changing Wi-Fi networks.

6. Removing and Re-adding the Device

Another method to reset the doorbell is to remove it from your Arlo account and then re-add it. In the Arlo app, select the doorbell under your devices, then choose the option to remove or delete it. After removal, follow the app’s setup instructions to add the doorbell as a new device. This approach essentially resets the device’s account association and can resolve issues related to account sync, firmware updates, or device registration errors.

7. Reset During Firmware Update

Firmware updates are often necessary for optimal performance, but occasionally, the doorbell may freeze or malfunction during the process. Performing a reset during a firmware update can resolve this problem. Access the Arlo app, check for pending updates, and follow the prompts to reset the doorbell while updating. This ensures the device applies the latest software corrections while eliminating glitches caused by incomplete installations.

8. Button Sequence Reset for Advanced Troubleshooting

Some Arlo models offer advanced reset sequences using a combination of button presses. For example, holding the reset button while pressing the doorbell button may trigger a deeper system reset. Consult your specific model’s user manual for the exact sequence. This method is typically used by technicians or advanced users to resolve firmware or system-level errors without removing the device from the account entirely.

9. Reset After Power Outages or Electrical Surges

Electrical interruptions can sometimes corrupt the doorbell’s temporary memory, leading to erratic behavior. To reset after a power outage or surge, perform a complete power cycle and, if necessary, a factory reset using the reset button. Additionally, ensure that your power supply is stable and surge-protected to prevent recurring issues. This method safeguards your device while restoring normal functionality after electrical disturbances.

10. Contacting Arlo Support for Remote Reset Assistance

If all manual reset methods fail, Arlo’s customer support can provide guidance or initiate a remote reset for your doorbell. Support representatives may troubleshoot your device, check firmware integrity, and remotely restore factory settings if needed. This method is particularly useful when the doorbell is unresponsive, the reset button is damaged, or network issues prevent a successful reset.

Safety Considerations

When handling your Arlo doorbell, it’s important to observe key safety precautions to protect both yourself and the device. Always disconnect power to the doorbell before attempting to manually reset or inspect hardware components to avoid potential electrical shocks. Use only the recommended tools and accessories provided by Arlo to prevent damage to the device. Avoid resetting the doorbell during extreme weather conditions, such as heavy rain or lightning storms, to ensure personal safety and proper device functionality. Lastly, ensure that the doorbell is securely mounted after any adjustments to prevent accidental detachment or damage to property.

Maintenance and Upkeep

Regular maintenance of your Arlo doorbell ensures optimal performance and longevity. Begin by routinely cleaning the doorbell’s casing and lens using a soft, lint-free cloth to remove dust or grime that may accumulate over time. Avoid using harsh chemicals or abrasive materials that could damage the surface or impair functionality. Check the battery status periodically and recharge or replace the battery as needed to prevent interruptions in performance.

Additionally, inspect the mounting brackets and screws to ensure they remain secure, especially after heavy winds or vibrations. Perform firmware updates promptly when notified to ensure the device has the latest features and security enhancements. By following these simple steps, you can ensure your Arlo doorbell continues to operate efficiently and reliably.

Conclusion

Resetting your Arlo Doorbell should be approached carefully, starting from soft resets and progressing to factory-level resets only if necessary. By understanding these ten methods, users can troubleshoot connectivity issues, improve device performance, and maintain optimal security monitoring without inadvertently causing damage or data loss. Whether using the app, physical buttons, or base station controls, each reset method offers a safe and effective approach to restoring your doorbell to full functionality. Thanks for reading this blog post on How to Reset Arlo Doorbell! We hope you found it helpful and informative.