How to Change Batteries in Simplisafe Keypad

The SimpliSafe security system is a popular choice for protecting your home with its wireless sensors, motion detectors, and sirens. One of the main components of this system is the keypad, which is used to arm and disarm the system.

How to Change Batteries in Simplisafe Keypad

However, like any electronic device, the batteries in the keypad will eventually need to be replaced. In this guide, we’ll show you how to change batteries in simplisafe keypad.

Necessary Items

Before you start, make sure you have the following items on hand:

  • New batteries (AA or CR123 depending on your keypad model)
  • Small screwdriver (if needed for your model)

8 Things to Know Before You Start

1) Check the Battery Level on Your Keypad

Check the Battery Level on Your Keypad

Before replacing the batteries, it’s always a good idea to check the battery level on your keypad. To do this, simply press and hold the number 1 key on your keypad for about 5 seconds. If you see a battery symbol with an “X” over it, then it’s time to change the batteries. If the battery symbol has two bars, then your batteries are still good.

2) Make Sure Your System is Disarmed

Before opening the keypad, make sure your SimpliSafe system is disarmed. This will prevent any false alarms from occurring while you change the batteries. And don’t worry; the system will still work even if the batteries are dead.

3) Determine Your Keypad Model

There are two main types of SimpliSafe keypads: AA battery and CR123 battery. Make sure you know which type your keypad uses before purchasing new batteries. So, before you start, take a look at the keypad and determine which type it is.

4) Prepare Your New Batteries

If you’re using AA batteries, make sure to remove any plastic film or packaging from the batteries before inserting them into the keypad. For CR123 batteries, make sure they are fully charged and ready to go.

5) Locate the Battery Compartment

The battery compartment on your SimpliSafe keypad is located on the back of the device. Some models may have a small screw holding the cover in place, while others may have a latch that can be easily opened.

Located on the Back of the Device

6) Remove Old Batteries

Carefully remove the old batteries from the compartment and dispose of them properly. If there is any corrosion or leakage, make sure to clean it up before inserting the new batteries. Even a small amount of corrosion can prevent the new batteries from working properly.

7) Insert New Batteries

Insert the new batteries into the compartment, making sure to match the positive and negative ends correctly. For AA batteries, make sure the flat end touches the springs at the bottom of the compartment. For CR123 batteries, make sure that both ends are facing inwards towards the springs.

8) Test Your Keypad

Once the new batteries are inserted, close the compartment and secure it if necessary. Then, press any key on your keypad to make sure it turns on and is functioning properly. If you see a low battery symbol with one bar, try replacing the batteries again with a different set. If the issue persists, contact SimpliSafe customer support for assistance.

Low Battery Symbol With One Bar

Changing the batteries in your SimpliSafe Keypad is a simple process that can be done in just a few minutes. By following these steps and keeping an eye on your battery level regularly, you can ensure that your security system remains fully functional at all times.

And don’t forget to properly dispose of your old batteries in an environmentally-friendly manner. Now, you can continue to enjoy the peace of mind that comes with a fully operational SimpliSafe system. 

12 Steps on How to Change Batteries in Simplisafe Keypad

Step 1: Determine the Battery Type

The first step is to determine what type of batteries your SimpliSafe keypad uses. Most models use either AA or CR123 batteries, so make sure you have the correct type on hand before starting. Also, check the battery level on your keypad by pressing and holding the number 1 key for about 5 seconds. If the battery symbol has an “X” over it, then it’s time to change the batteries.

Step 2: Disarm Your System

Simplisafe System is Disarmed

Before opening the keypad, make sure your SimpliSafe system is disarmed. This will prevent any false alarms from occurring while you change the batteries. While the system will still work even if the batteries are dead, it’s always best to disarm it as a precaution.

Step 3: Prepare New Batteries

If you’re using AA batteries, remove any plastic film or packaging before inserting them into the compartment. For CR123 batteries, ensure they are fully charged and ready to go. As a general rule, it’s always a good idea to have spare batteries on hand in case of emergencies.

Step 4: Locate the Battery Compartment

The battery compartment is located on the back of your SimpliSafe keypad. Depending on the model, it may have a small screw holding the cover in place or a latch that can be easily opened. Even if it has a screw, you may be able to open the compartment without removing it.

Step 5: Remove Old Batteries

Carefully remove the old batteries from the compartment and dispose of them properly. If there is any corrosion or leakage, make sure to clean it up before inserting the new batteries. Any buildup can prevent the new batteries from working properly.

Step 6: Insert New Batteries

New Batteries Into the Compartment

Insert the new batteries into the compartment, making sure to match the positive and negative ends correctly. For AA batteries, make sure the flat end touches the springs at the bottom of the compartment. For CR123 batteries, ensure that both ends are facing inwards towards the springs.

Step 7: Close Battery Compartment

Once the new batteries are inserted, close the compartment and secure it if necessary. If there was a screw holding the cover in place, make sure to put it back in. Then, press any key on your keypad to make sure it turns on and is functioning properly.

Step 8: Test Your Keypad

To ensure that your keypad is working correctly with the new batteries, try arming and disarming your system. If you see a low battery symbol with one bar, try replacing the batteries again with a different set. If the issue persists, contact SimpliSafe customer support for assistance.

Step 9: Dispose of Old Batteries

Make sure to properly dispose of your old batteries in an environmentally-friendly manner. Many cities have designated drop-off locations for batteries, or you can recycle them at a local electronics store. Never throw old batteries in the trash.

Step 10: Monitor Battery Levels

Regularly Check the Battery Level

To avoid any future issues with your keypad’s battery life, make it a habit to regularly check the battery level on your system. You can do this by pressing and holding the number 1 key for about 5 seconds. If the battery symbol has an “X” over it, it’s time to replace them.

Step 11: Keep Spare Batteries

It’s always a good idea to have spare batteries on hand in case of emergencies or unexpected low battery levels. This way, you won’t have to worry about your system being down for an extended period of time.

Step 12: Enjoy Peace of Mind

By following these steps and keeping an eye on your battery level regularly, you can ensure that your SimpliSafe system remains fully functional at all times. Now, you can continue to enjoy the peace of mind that comes with a fully operational security system. And don’t forget to properly dispose of your old batteries in an environmentally-friendly manner. 

So, it’s always a good idea to keep spare batteries on hand in case of emergencies or unexpected low battery levels. This will ensure that your SimpliSafe system remains fully functional at all times, providing you with the peace of mind and security you desire. 

Remember to regularly check and monitor your battery levels, dispose of old batteries properly, and follow the steps on how to change batteries in simplisafe keypad outlined above to change your batteries when needed.

8 Things to Avoid When Changing Batteries in Simplisafe Keypad

Changing batteries in your SimpliSafe keypad is a simple process, but there are a few things that you should avoid to ensure a smooth and successful battery replacement. Here are 8 things to keep in mind when changing batteries in your SimpliSafe keypad:

1. Using the Wrong Battery Type

Determine the Correct Battery Type

As mentioned before, it’s important to determine the correct battery type for your SimpliSafe keypad before starting the replacement process. Using the wrong type of battery can not only prevent your system from functioning properly but can also cause damage to the keypad itself.

2. Not Disarming Your System

Before opening the keypad and changing the batteries, make sure to disarm your SimpliSafe system. This will prevent any false alarms from occurring while you handle the keypad and replace the batteries.

3. Not Checking Battery Level

Before changing your batteries, it’s always a good idea to check the battery level using the number 1 key on your keypad. If the battery symbol has an “X” over it, then it’s time to replace the batteries. If not, you may want to hold off on changing them until the battery level gets lower.

4. Not Having Spare Batteries

To avoid any potential issues with your system being down for an extended period of time, it’s always a good idea to have spare batteries on hand. This way, you can quickly replace them if needed and continue to have a fully functional security system.

5. Not Properly Disposing of Old Batteries

Old batteries should never be thrown in the trash, as they can harm the environment. Make sure to properly dispose of them by recycling them at a designated drop-off location or electronics store. While it may take a bit more effort, it’s important for the health of our planet.

6. Not Cleaning Corrosion or Leakage

If you notice any corrosion or leakage from your old batteries, make sure to clean it up before inserting the new ones. This buildup can prevent the new batteries from working properly and cause issues with your keypad’s functionality.

7. Not Securing Battery Compartment

After inserting the new batteries, make sure to secure the battery compartment properly. If there was a screw holding it in place, don’t forget to put it back in. This will ensure that the batteries stay in place and your system remains functional.

8. Not Testing Your Keypad

Once you have replaced the batteries and secured the compartment, test your keypad by pressing any key. This will ensure that the new batteries are working correctly and your system is fully functional. If you encounter any issues, try replacing the batteries again or contact SimpliSafe customer support for assistance.

By avoiding these eight things when changing batteries in your SimpliSafe keypad, you can ensure a smooth and successful battery replacement process. Remember to check your battery levels regularly, have spare batteries on hand, and properly dispose of old batteries for a fully functional security system at all times. 

So go ahead and enjoy the peace of mind that comes with a well-maintained SimpliSafe system.  Keep these tips in mind whenever you need to replace your keypad’s batteries, and you’ll be all set to keep your home safe and secure.

8 Additional Tips for Maintaining Your SimpliSafe System

Aside from regularly checking and changing your keypad’s batteries, there are a few other things you can do to ensure the optimal functionality of your SimpliSafe system. Here are eight additional tips for maintaining your SimpliSafe system:

1. Keep Sensors Clear

Make sure to keep any sensors in your home clear of obstructions. This includes not placing objects in front of or on top of sensors, as well as regularly dusting and cleaning them to prevent any buildup that could potentially interfere with their function.

2. Test Your System Monthly

To ensure that your system is functioning properly, you should test it at least once a month. You can do this by entering your PIN on the keypad, pressing “Test,” and following the prompts. This will test all sensors and ensure that they are communicating with the base station.

3. Update Contact Information

If you change your phone number, make sure to update it in your SimpliSafe account so that the monitoring center can reach you in case of an emergency. You can also add additional emergency contacts if you are unavailable.

4. Check Wi-Fi Connection

If you have a SimpliSafe system with a built-in camera or other wireless components, make sure to regularly check your Wi-Fi connection to ensure that they are communicating properly with the base station. If there are any issues, try resetting your router or contact SimpliSafe customer support for assistance.

5. Keep the Base Station Plugged In

To ensure that your base station is always ready to receive signals from sensors, make sure to keep it plugged in at all times. This will also prevent any potential issues with low battery levels for the base station itself.

6. Replace Batteries in Other Components

Aside from the keypad, other components of your SimpliSafe system may also require battery replacements, such as sensors and cameras. Make sure to check them regularly and replace batteries as needed.

7. Perform Software Updates

SimpliSafe periodically releases software updates for their systems that can improve functionality and security. Make sure to keep your system up-to-date by installing these updates when prompted. As a bonus, SimpliSafe offers a lifetime warranty on their systems for customers who have an active monitoring plan and keep their systems up-to-date.

8. Contact Customer Support

If you encounter any issues with your SimpliSafe system, don’t hesitate to contact customer support for assistance. They can provide troubleshooting tips or schedule a technician to come and fix any potential problems. It’s always better to address any issues early on rather than wait until they become more serious.

By following these additional tips on how to change batteries in simplisafe keypad, you can ensure that your SimpliSafe system is always functioning at its best and providing the highest level of protection for your home.

Regular maintenance and attention to potential issues will help keep your system reliable and effective in keeping your home safe and secure. So don’t forget to add these tips to your routine to maintain your SimpliSafe system.  Always stay vigilant and keep your home protected with SimpliSafe.

Frequently Asked Questions

Can I Use Rechargeable Batteries for My Simplisafe Keypad?

Yes, you can use rechargeable batteries, but make sure they are fully charged before inserting them into your keypad. It’s recommended to use high-quality alkaline or lithium batteries for optimal performance.

What Happens If I Don’t Replace My Batteries?

If your batteries die, your keypad will stop functioning and won’t be able to communicate with the base station. This can potentially leave your home vulnerable if there is an attempted break-in. It’s important to regularly check and replace batteries to ensure continuous protection.

How Often Should I Replace My Batteries?

It’s recommended to replace your batteries at least once a year or when the battery level indicator on your keypad drops below 30%. However, it’s always a good idea to check and replace them more frequently if needed.  Keeping spare batteries on hand is also recommended in case of emergencies.

Can I Dispose of Old Batteries in the Trash?

No, it’s important to properly dispose of old batteries in designated recycling facilities. You can also check with your local waste management services for specific instructions on how to dispose of batteries safely.

Conclusion

Maintaining your SimpliSafe system is crucial to ensure that it continues to provide the best protection for your home. By following these additional tips on how to change batteries in simplisafe keypad and regularly checking and changing batteries, you can keep your system running smoothly and effectively.

Don’t forget to take advantage of other features, such as monthly testing and software updates, to further enhance the functionality of your SimpliSafe system.

Photo of author

Safety Fic

Leave a Comment