Are you having trouble resetting your Schlage Encode Smart Wi-Fi deadbolt? Don’t worry, the process is relatively simple. Here’s what you need to do.
Regarding home security, having a smart lock is just as important as keeping your doors and windows locked. Many homeowners opt for locks featuring the Schlage Encode Smart Wi-Fi Deadbolt for added convenience and peace of mind when protecting their homes from intruders.
However, if you’re having trouble with your Schlage Encode or need to reset it for some reason, don’t worry – in this blog post, we’ll go through all the necessary steps to get your deadbolt working smoothly again! Keep reading to learn how to reset Schlage encode smart Wi-Fi deadbolt!
What is the Importance of Resetting the Lock?
Resetting the lock allows you to clear out any previous codes, settings, and data that were stored within it. This is especially important if your Schlage Encode Smart Wi-Fi Deadbolt has recently been purchased or used by someone else who had access to the code – resetting it ensures that no one can enter your home with the previous code.
Additionally, resetting your lock can also help you cleanly set up a new code for yourself or restore your lock to its factory settings if it has become unstable in some way.
Overall, resetting your Schlage Encode Smart Wi-Fi Deadbolt is an important part of preserving the security of your home. Now, let’s go over how to do it.
10 Easy Steps on How to Reset Schlage Encode Smart Wi-Fi Deadbolt
Step 1: Install the Schlage Encode Smart Wi-Fi Deadbolt:
First, ensure your Schlage Encode Smart Wi-Fi Deadbolt is installed correctly on your door. Then, locate the reset button on the interior side of the lock. This can be found on the back of the front plate, usually towards the top. You will need a small, thin tool like a paperclip or pin to press the button.
Step 2: Press the Reset Button:
Once you have located the reset button, use your tool to press and hold this button. Remember that you need to hold the button for up to 10 seconds. You’ll know the process has been initiated when you see the lock’s LED light flashing and hear a long beep sound. This indicates that the reset process has begun.
Step 3: Release and Restart:
After you’ve held the reset button for 10 seconds and heard the beep sound, release it. The LED light on the lock will continue to flash for a few more seconds, indicating that the reset process is still underway. Do not interfere with the lock or attempt to use it during this time.
The reset process is complete once the light stops flashing and you no longer hear any sound. You can now reenter your new access codes and reconfigure your lock settings as desired.
Step 4: Set Up New Codes:
Now that your Schlage Encode Smart Wi-Fi Deadbolt has been reset, it’s time to set up your new codes. Open the Schlage Home app on your smartphone and tap ‘Lock Settings.’ From there, choose ‘Access Codes’ and tap ‘Add Code.’ Here, you can enter your desired personal access code.
Be sure to choose a code that is hard for others to guess but easy for you to remember. Once you have entered your new code, tap ‘Save.’ Your new access code is now set and ready to be used!
Step 5: Test Your New Code:
Once you’ve set up your new access code, it’s important to test it out to ensure it’s working properly. To do this, simply enter your new code into the lock’s keypad and ensure the lock unlocks. If the lock does not unlock or there’s an error in entering the code, repeat the resetting and setting a new code.
If the problem persists, contact Schlage’s customer support for further assistance. Remember, knowing how to reset your Schlage Encode Smart Wi-Fi Deadbolt and set up new codes can help maintain the security of your home.
Step 6: Sync with Wi-Fi:
After resetting your Schlage Encode Smart Wi-Fi Deadbolt and setting up your new code, it’s crucial to sync the lock with your Wi-Fi network. To do this, open the Schlage Home app and select ‘Lock Settings’. Then, tap ‘Wi-Fi Settings’ and choose your Wi-Fi network from the list of available connections.
Enter your Wi-Fi password and tap ‘Connect.’ Your lock is now synced with your Wi-Fi network, and you can control it remotely from your smartphone. If you encounter any issues during this process, remember to check your Wi-Fi connection or contact Schlage customer support for assistance.
Step 7: Test Remote Access:
Once your Schlage Encode Smart Wi-Fi Deadbolt is synced with your Wi-Fi network, you should test its remote access capabilities to ensure everything works properly. Open the Schlage Home app from your smartphone and go to ‘Lock Settings,’ then ‘Access Codes.’ Try locking and unlocking your deadbolt remotely.
If you can successfully control your lock from your phone, your setup is complete. If you cannot do so, make sure your lock is within range of your Wi-Fi network, or try resetting and syncing again. If the issue persists, contact Schlage customer service for further help.
Step 8: Configure Guest Access:
If you want to share access to your home with family members, friends, or service providers, the Schlage Encode Smart Wi-Fi Deadbolt allows you to create guest access codes. To set up guest access, open the Schlage Home app on your smartphone and go to ‘Lock Settings,’ then tap ‘Access Codes.’ Select ‘Add Code’ and enter a unique code for your guest.
Tap ‘Save’ to store the new access code. For enhanced security, consider setting an expiration date for the guest code, especially for a service provider or temporary guest. This can be done in the ‘Access Codes’ settings under each code.
Step 9: Monitor Activity:
After setting up your Schlage Encode Smart Wi-Fi Deadbolt, monitoring the lock’s activity is important. The Schlage Home app allows you to check the activity log, which shows when the lock was accessed and by whom. To view the activity log, open the Schlage Home app and select ‘Activity’ from the menu. This feature helps you monitor your home’s security by keeping track of who is coming and going, which is especially useful if you have set up guest codes.
Step 10: Regular Maintenance:
Finally, maintain your Schlage Encode Smart Wi-Fi Deadbolt regularly to ensure it remains in optimal working condition. Check the batteries every few months and replace them when necessary. Clean the lock’s keypad and the surrounding area to prevent dust buildup.
Keep the Schlage Home app updated to the latest version to enjoy the newest features and security enhancements. If you encounter any issues during regular use, don’t hesitate to consult the user’s manual or contact Schlage customer support for help.
Following the above steps, you can easily reset your Schlage Encode Smart Wi-Fi Deadbolt and update it with the latest features. With this secure, connected lock, you can rest assured that your home is safe and secure.
5 Additional Tips and Tricks
- If you do not know how to reset a Schlage Encode Smart Wi-Fi Deadbolt, you can call the customer service number provided by Schlage for more assistance.
- Ensure you have your product details handy when contacting customer support so they can quickly identify your product and provide relevant advice.
- Remember to power cycle the deadbolt if the reset procedure does not work. Unplug and plug back in the power adapter for a few seconds, then try resetting it again.
- If you cannot remember your master code, you will need to contact customer service, as this cannot be reset from within the lock itself.
- Once you have completed a reset, you must repair the lock with your Wi-Fi network and any other smart home devices previously connected to it.
These are just some additional tips and tricks for how to reset a Schlage Encode Smart Wi-Fi Deadbolt.
5 Things You Should Avoid
- Never try to open the lock manually with a screwdriver or other tools. This can cause permanent damage to the lock.
- Only try to reset the lock after following Schlage’s instructions, as this can brick your device.
- Avoid pressing too many buttons simultaneously during the reset procedure – this can confuse the deadbolt and affect its performance.
- Do not reset the lock if you have recently changed any settings; this will revert them to their original configuration.
- Never attempt to use your master code if you cannot remember it – always contact customer service first.
You should try and avoid these things when resetting a Schlage Encode Smart Wi-Fi Deadbolt. Always take precautions and use extra caution to ensure the safety of your home and lock.
Conclusion
With the help of this guide, you have learned how to reset Schlage encode smart Wi-Fi deadbolt. Resetting your Schlage deadbolt is simpler and faster than ever, with easy steps that can be tailored to your specific model computer. After resetting, you must repair your Key to the Assa Abloy app before it begins working.
Remember to always keep up with regular maintenance and troubleshooting so that your Schlage’s smart technology stays reliable in providing hygienic access control for your home, office, or other residential or commercial space.
A secure lock is among the most important safety precautions for any building and its inhabitants – take care of yourself today!
